Ignition Coil for 2-stroke 33cc 43cc 47cc 49cc 50cc Mini Moto Dirt Pocket Bike Chopper Scooter Kids Quad ATV Minimoto

Installed easily. Ground wire connection end is not the same as the original one. I reused the original wire. This is on SYX MOTO 50cc bike. Generic part if yours is a different brand bike it might not be an issue but if you’re able to install the part you can probably splice a wire if you needed too.

Great coil no issues, fast shipping.

Bolted right up

Sadly the unit came bent. I don’t know if it was a fluke or poor mfg but one pick up is bent. ((( update... I was able to bend the pick up back into place and it’s working ok... I could have returned or replaced it but why bother if I can fix it with ease and it works)))

The coil arrived as promised. After installing it and gapping it I then tested it's ability to work. Testing was done using not one but two new properly gapped plugs .The plug was removed from the head to allow for no compression A plug was put on the coil and grounded to the frame to complete the circuit . Rather than putting the pull starter on to the crank shaft , I coupled a 1/2inch Ryobi drill to the crank to get up to around 1000 RPM . No spark !!!! I also did the test using a neon tester , still nothing ,but as a last resort i put my fingers on the spark plug tip, DEAD DEAD DEAD !!!!!!!!! by ---HERB THE POWERMAN---

Worked perfectly. Thank you

This worked for the failed stock coil

Upon installation of the spark, plug and misalignment; the boot, detached and coil inside boot, was stretched, too far very poorly made