BOSCH BSPE6D 12-Piece Assorted Set Spiral Flute High-Carbon Steel Screw Extractor & Black Oxide Drill Bits Ideal for Removing Stripped Screws, Bolts, Fasteners

Worked like a charm!! Had not one but two bolts/screws to remove. Soaked the bolts the night before with WD-40. So easy to use.

So I usually don’t write reviews but this extractor set is worthy. I use Bosch hammer drills on my job and have been happy with their tools and bits.With that being said I bout a project motorcycle that was laid down and banged up and discovered several broken bolts. These pictures are the gas tank bolt and the right foot peg bolt. I read a bunch of reviews and decided to try these. I went slow bc some of y’all said the bits snapped off. Drilled the pilot hole then tapped in the bit gently with a small hammer and gradually put counter clockwise pressure with small vice grips. To my pleasant surprise both bolts backed out. Man what a great rush. Give them a try. Take your time and lots of WD or PB blaster.

Do not buy this product. 10min into using this tool, 2x drill bits broke and 2x extraction tools broke. I used to wrench on cars for a living but now it's just a hobby and this tool was just down right disappointing. Bosch needs to be using a material with a higher tensil strength for this. I threw the remaining tools away because of how badly they performed. I even used to work at Bosch so my disappointment is probably greater than most people but I would not recommend this to anyone. Period.

I ordered 5 different sets of tools to remove a stripped screw. The first one I tried didn’t do anything but this tool removal tool worked perfectly and removed the screw in about 30 seconds. I didn’t even try the other 3 tool sets. I will try them next time I have a stripped screw. Don’t buy anything else, you will be waisting your time and money.

I used this for extracting bolts out of an old outboard with many stripped/broken bolts corroded into the block/heads, so the primary use was extracting stainless steel bolts from aluminum. I pulled 2-3 bolts out with this and it worked pretty well. Remember that the fluted extractor should be turned with a wrench--not with a drill, otherwise you will likely immediately break the extractor. And you should use generous amounts of PB Blaster/Kroil.Eventually, I did over-abuse this kit and broke an extractor off in a bolt and broke two of the drill bits attempting to get the extractor out. The bolt was actually turning when the extractor broke, so I kept turning even though the resistance built up and it felt aggressive. These extractor kits all require finesse, but I expected a little more from Bosch. I used a dremel to grind the extractor tip out, then drilled out the bolt the rest of the way.So the tool did eventually break, but it lasted longer than the other cheap kits I've gotten on Amazon. Overall, the kit is good, and had I been a little more gentle, it probably would not have broken, but in the end, it is still a basic fluted extractor kit so fairly limited and requires a significant amount of finesse and patience.I'll probably buy another to replace the broken extractor since this is still the best kit for the money on Amazon. The only thing I would change about the kit is to have reverse bits. The included bits are standard clockwise bits, and I don't really like drilling out bolts/screws clockwise.

Excellent! Had an engine mount bolt break on my motorcycle after an accident bent the bolt and slider. I was worried when I ordered this because if the removal tool broke off I’d be screwed. Bits are high quality drilling and bolt came out easily. I followed proper instructions headed the area with torch and sprayed penetrating oil into the threads first. Worked perfect with no visible damage to the kit. Very pleased.

The extractor didn’t work out for me. As stated in other reviews the instructions aren’t clear and you just have to figure it out. However, it just didn’t perform as needed.I rated it a three because it could of been due to the lack of instructions.

The Bosch screw extractor set is a lifesaver for removing stripped screws. The hardened steel construction ensures durability and reliable performance.The variety of sizes tackles a wide range of screw types. The straightforward instructions make extraction easy, even for beginners. The precision-machined tips grip stripped screws securely. This set has saved me countless hours of frustration, a must-have for any toolbox