InoKraft D1 LVLP Air Spray Gun Premium Kit, Easy to Use, Paint Gun for Cars & House DIY Painting, 1.3/1.5/1.7mm Nozzles, with Paint Sprayer Accessories

This is my 5th air sprayer, not this brand but others. TO include the Old style with can at the bottom, a Spectrum 1.7 over a hundred at HF. A couple of the HVLP on here being sold with 4 tips. I am a cabinet maker Pro, I have always been trying to find a gun like this, since my jobs are small and One off.I shot Proluxe PPG DEFT straight no thinning, what a treat. I will be shooting Breakthrough in a couple days, will come back and let you know.First off- My Rig is a Central 21 gal compressor. I have a line dryer and a secondary regulator before I attach my hose length.This one comes with both the dryer/cleaner and the regulator. Set your compressor so that it can feed the gun enough to run 21lbs while trigger is pulled. Now here is the thing, It does not want more than 50lbs, but to get it to run at 21lbs pulled it will read upwards on the Reg over 50. . .FWIWI ran it according to the Quick Start guide and was shooting right off and not getting orange peel. The combo of LPLV is the key. The other guns I mentioned just would not lay down with the product I was using. This one gives you enough control to run it and get the mist wanted.The needle set up reminds me of a Binks set up with the packing nut style and Not the needle nut being removed via flat tip to clean. It cleaned easy.Mine showed up smelling like mineral spirit and had some residue around the tip. Was going to take a pic but I just cleaned it up and shot the Deft without any trouble.So far I have ran PPG Deft, now known as Proluxe, straight out of the can; no thin. I also ran PPG Breakthrough Enamel with a 10% thin and have a good lay down and the control is nice. I recommend this gun.

I’ve been painting for 26 years now. And was hesitant to buy this paint gun at first. But after all the videos and reviews that I have watched and seen. I can honestly say that I’m glad that I did purchase it. It a great gun and works great. The only thing that I could complain about is that wish it came with a bigger paint cup. But that’s it. Very well made and light weight in the hand. And handles everything I’ve thrown at it. No issues with the gun what so ever. Great purchase and great bang for the buck as well

Great gun. This took my mediocre paint job to top notch. I did my first full paint job on my camper shell and the paint laid down amazing. Easy to use and comfortable. Easy to clean and quality parts. Recommended by Brian from Paint Society.

Purchased after watching several YouTube reviews. Painted 2 vehicles now with it and very happy. Ppg Omni base with finish 1 fc720 clear. Both jobs turned out great.

Buena calidadad flujo constante y estable

I bought this kit specifically for applying nitro cellulose finishes to guitars. My expectation is that with the additional two fluid nozzle sizes I should be able to apply some higher viscosity cabinet finishes and so on.The only negative I have to report is that the fluid nozzle already in the gun as furnished form the manufacturer was insanely over-tightened. I was unable to remove it with the provided wrench and had to resort to a 3/8" drive ratchet with socket. Fortunately, I was able remove it to clean the gun and reinstall without damage.Everything else about the kit is exceptional. The LVLP system is perfect for my application. My compressor is rated for 4.0 CFM at 90 PSI. Since I was spraying with only about 35 PSI at the gun, I rarely had to stop to let the compressor "catch up".The seller responded promptly to my email regarding my concern that I might damage the gun while trying to remove the over-tightened fluid nozzle. They assured me that their warranty period extends beyond that shown on Amazon, and that they would replace the nozzle if I damaged it in my attempt to remove it.I highly recommend this product and seller.

This is actually a great fun to paint with. Price did go up and might buy it again if it goes back down.

Multiple users online used and said what a great LVLP spray gun this was for them. During reviews they went through guns and contents saying how air caps showed no flaws and the finished product after clear coats looked like what you would expect from a decent spray gun that wasn't $300 - $800. First gun showed up and the gun itself looked great. Air cap was flawless and no issues with anything else. Loved that it came with regulator that visually was well made as well as an oil/water separator that looked equally well made but when looking at the additional 1.5 & 1.7 cap and needles immediately you could see what I can only describe as an elderly blind person using a dart they were just throwing at a dart board to try and clean the air cap. Front had a bunch of swirly long scratches and spotty holes where it looked as though the original holes were missed and got dotted with needle like jab marks. On the inside of the air cap there was more of the same but also needle like hole marks in the threads as well. I can't imagine what that paint pattern would have looked like when that turbulent air & paint mixing trying to flow smoothly over all those scratches and pitted holes all over. Ordered a replacement and it was even worse with both additional aìir caps being damaged the same way just now both were no good. I must say that if you Ordered this gun just for the gun and not for the extra 1.5 or 1.7 sizes then you should have an excellent gun with a 1.3 size as those both seemed in excellent condition. No response after 3 days so I'm just going to return both DV1 LVLP Drizzles and purchase the R500/610 with the extra caps for $20 less and see how that is. I did see that the original 500 had a taller more uniformed spray pattern than the 610 but just reviews so who knows. Just the gun alone I probably would have given a 5★bur the extra pieces paid for both times were not caught by whatever quality control they have.☆☆☆☆So I reached out to Inokraft and explained the situation and they immediately took care of the problem thanking me for bringing it to their attention so they could look into it. This gun I bought for my brother and I must say that this gun is amazing for what I payed for it! I have guns that are $400-$500 and honestly there really isn't much difference. This came with a 1.3, 1.5 & a 1.7 cap & needle! I bought another so my brother could use both and not have to have just one for all coatings. I'm probably going to buy another for myself I like it so much! This even comes with a pps 1.0 adapter so it's ready to go! Good fan pattern lays paint smooth and the clearcoat came out perfect. Used it with EGC 22TT HS Primer Filler, Valpar LVBR 100 series liquid pearl basecoat 47A Black Mica ( 99 Impreza ) & Acme Finish 1 FC770 clearcoat. This gun was flawless and subaru looks like it rolled off the assembly line yesterday! Used to only see the red pearl under the black when it was wet while washing but especially phenomenal in the sunlight! I would recommend this gun to any and all. This forged gun is fantastic!